Linksys Velop Setup

Linksys Velop Setup

The latest Linksys Velop mesh systems are decent enough to meet all your networking requirements. Additionally, the current Velop technology supports WiFi 6 and is available as dual and tri-band mesh WiFi systems. Similarly, to avail of the complete Velop technology, you have to perform Linksys Velop setup first.

In addition, it is a primary necessity to configure the Velop mesh according to your requirements. Likewise, after setting up this networking device, you can connect up to 60 devices. Further, it is essential to enter the admin panel first before you learn how to setup Linksys Velop. For configuration, you can opt for the Web GUI method or go ahead with the app.

Moreover, to assist you with the complete Linksys Mesh setup, we share this brief tutorial with you. Additionally, you will find each method with complete steps and we also disclose the troubleshooting methods for the setup issues. So, here we begin now!

Necessities for Linksys WiFi Mesh Setup

As you forward with the Linksys Velop router setup, ensure you have the following items with you:
Linksys Velop System

Linksys Velop System

Stable internet connection

Stable internet connection

Ethernet cables

Ethernet cables

Web address or Linksys app

Web address or Linksys app

Admin username and password

Admin username and password

Computer Laptop or Smartphone

Computer/Laptop or Smartphone

Admin details

Admin details

How to Setup Linksys Velop Mesh Router?

Generally, to setup Linksys Velop, you can choose the web address method or the Linksys app as discussed above. Similarly, it is essential to follow the steps orderly to avoid the setup failure. Additionally, ensure that your Linksys Velop units are powered on while configuring them. Moving back to the point, here we explain the both methods below:

Setup using the Web GUI

  • To begin with, connect the Velop mesh network to the computer/laptop.
  • Next, open the web browser and type linksyssmartwifi.com web or 192.168.1.1 IP address in the browser URL bar.
  • Further, mention your admin username and password on the Login window.
  • Here, you reach the smart Home screen of the Velop mesh.
  • Now, click on the CA link at the dashboard bottom.
  • Next, click on the Connectivity>CA router setup.
  • Hereon, you have the option to create a new SSID name and password.
  • So, enter the details here and ensure to use a strong password.
  • After that, tap on Setup Node>OK/Apply.
Velop Setup Using The Web GUI
Velop Setup Using The Web GUI
  • The LED on your Velop router starts flashing and then turns into solid blue.
  • Check here if the new Velop name is broadcasting to you, and then connect to this network.
  • Next, you get the Your Master Node is now Configured message on your computer screen.
  • If you have additional Nodes, then turn them on and click on the Add Wireless Nodes.
  • Hereon, wait till the LEDs on the child nodes turn into Solid Blue and then tap on the OK
  • Also, you can adjust further settings like Guest Network, Device Prioritization, and more.
  • Finally, you are done with the Linksys Velop router setup.

Velop Setup through the App

  • First and foremost, ensure you have an updated version of the app on your smartphone.
  • Now, open the app and log in to your cloud account by using admin credentials.
  • After that, you reach the smart app dashboard and click on Menu.
  • Now, tap on the Setup a New Product/Velop & Mesh routers button and wait till the app searches and finds a Node.
  • Ensure Bluetooth is ON on your smartphone.
  • Within a few seconds, the app will detect the Node and turn purple.
  • Now, click on Next>Create an account>Name your WiFi>Give your Parent Node a name>Next.
  • After that, you are prompted to Add another Node, if you want to add that one, then click on Add Another Node & follow the instructions.
  • If not want to connect any child node, then tap on That’s it for Now.
  • You can also configure the other settings like Parental controls, Guest Network, etc.
  • Lastly, click on Save or Apply to secure the settings.
Linksys Velop Setup Through The App

How to Add a Secondary Node to My Linksys Velop System?

Further, you can easily connect the Child node to the existing parent node router. For this, you can use the simple Web GUI methods steps and complete the setup. In this section, we explain to you how to setup Linksys Mesh system for child nodes. Let’s have a look:

How To Add A Secondary Node To My Linksys Velop System
  • Initially, power on your Velop’s child node.
  • Now, open the web browser and type linksyssmartwifi.com.
  • Further, enter the admin credentials on the Velop login window to enter the admin panel.
  • After that, go to the CA link at the dashboard bottom and click it.
  • Afterward, tap on the Connectivity>CA router setup>Add Wireless Nodes (Check guidelines for Wired nodes also in guidelines on screen).
  • Next, follow the further instructions to complete the child node setup.
  • You can set three nodes to a single Velop network, not more than this.
  • At last, you have completed the secondary node setup successfully, click on Save or Apply to secure the changes.

What are the Common Velop Setup Issues? How to Fix?

While you are performing Linksys Velop setup, then different types of issues arise that can hinder the process. These may be:
Connection drop-off

Connection drop-off

Outdated Firmware

Outdated Firmware

Inaccurate admin credentials

Inaccurate admin credentials

Internet interferences

Internet interferences

Power supply issues

Power supply issues

Faulty network cables

Faulty network cables

Steps to fix the Linksys Velop Setup issues:

  • Ensure you are using the accurate admin username and password.
  • Check that your Velop mesh has an adequate power supply.
  • Make sure the network cables you use are not damaged or tangled.
  • Update the mesh system Firmware if prompted on the Window.
  • Power cycle your Velop router to fix connectivity issues, glitches, and bugs.
  • Make sure the Ethernet cables are connected properly to the router ports.
  • Eliminate the network interferences like mirrors, furniture, cordless phones, etc.
  • If nothing else works, then factory reset your router.
Steps To Fix The Linksys Velop Setup Issues
Bottom line

All things considered, the information we share with you will assist you to easily perform the Linksys Velop setup. Additionally, you can opt for any of the methods and can configure parent node as well as child nodes too. If face any issues with the setup procedure, then must walk through the troubleshooting section to fix those errors. Seeking more info? Drop us a line!

Frequently Asked Questions

Can I set up Linksys Velop Without the App?

Yes, you can perform Velop setup without by using the web GUI method.

Do I Need to Login to Linksys Velop to Configure the Settings?

Yes, it is necessary to access the admin panel before you configure the velop settings.

Can I Setup My Linksys Velop Mesh System With an Existing Router?

Yes, you can configure the Linksys mesh system with an existing router using the Bridge Mode.