Generally, Linksys Velop is a renowned networking gadget in the networking market. It delivers superfast internet speed and eliminates the dead zones at your premises. Likewise, users sometimes encounter Linksys Velop red light issues that are temporary yet common. However, it is necessary to fix this problem by understanding the causes.
In addition, the Linksys Velop solid red light indicates no internet on your device or that your gadget is disconnected from the internet. Similarly, this issue arises due to various reasons that we discuss later. Further, the red light can be solid or blinking, which differs in causes. Also, Linksys Velop flashing red points out that the node is not connected to the primary unit.
Hence, to inform you about the Linksys Velop mesh router red light errors, we share this informative post. We also disclose the suitable troubleshooting methods to resolve this red light issue. So, to get more information, keep focused on this post.
Why Does Linksys Velop Red Light Error Occur?
It is essential to remain aware of the Linksys Velop node red light consequences that we mention below:
- Linksys Velop solid red light shows no internet
- Red light blinks if the node is not connected to the primary unit
- Corrupted or Outdated Firmware
- Linksys Velop nodes are out of the main unit range
- Improper configuration
- Damaged WAN port
- Networking cables are not connected properly
Troubleshooting Linksys Velop Mesh Red Light Issue
Moreover, we better understand the Linksys Velop blinking red light and solid red light errors and their causes. Similarly, it is necessary to fix the issue for the optimal performance and maintenance of the Velop mesh. In this section, we explore the best-in-class suitable methods that will easily fix the red light error. Let’s have a look:
Power Cycle Linksys Velop
It is a unique method to fix internal Velop glitches and bugs. Also, the blinking red light issue can be resolved after rebooting your Velop mesh. For this, plug out your Velop primary unit, computer, and then the modem. Wait for at least 30 seconds and plug back the devices.
Reposition the Parent Node
If the child nodes are far away from the parent node or the modem is at a farther distance, then relocate your Velop system. Place all the nodes nearby till the connection gets successful, after that you can place them where required and check if the Linksys Velop blinking red error is fixed.
Check the Network Cable Connections
Reconfirm the Network cable connections, if they are not connected to the proper ports, then change the ports and see if the issue gets resolved. Also, check the WAN port, if it is damaged then use another one or ask technicians to change that port. Sometimes Ethernet cables are loosely connected, hence tightening the connections.
Look at the Network Configuration
Generally, a few of the networking device models work with 2.4GHz and specific channels. So, confirm the network settings of the Velop and change them from 5GHZ to 2.4GHZ. It will rectify the Linksys Velop mesh router red light issue.
Update the Velop Firmware
Occasionally, an outdated or corrupted firmware file will cause network connectivity errors that are annoying to users. So, it is recommended to check and update the compatible Firmware file version on your Velop. It will help to resolve the Linksys Velop node red light issue.
Remove the Network Obstructions
If Velop is placed inside thicker walls, a mirror room, or near electromagnetic devices like ovens, etc., then a red light issue commonly occurs. So, remove the obstructions that you can shift or relocate your Velop. If the issue still persists, then contact your ISP authority.
Factory Reset the Velop Mesh
If none of the above-said methods work, then factory reset Linksys Velop. For this, look for the reset button on your Velop and press and hold it for 10-15 seconds. When the LED on the primary unit starts blinking, release the reset button. Wait patiently till the primary mesh unit reboots itself, now your Velop reverts to its default settings and reconfigures it.
Bottom Line
All in all, the information we share above will surely assist you with the Linksys Velop red light information. In this post, you will read about the root causes responsible for this error and also the troubleshooting methods to fix this problem. Similarly, if you encounter a red light issue on your Velop mesh then must walk through this post, it will help you to resolve this issue. If you are still looking for more information regarding Linksys Velop, then stay tuned to us!