Factory Reset Linksys Velop (3 Quick Methods)

Linksys Velop is a smart mesh system but users also face temporary issues with it that can’t be fixed with other methods. So, the factory reset Linksys Velop process is the last option. Three methods are used to reset the device- Using the Reset Button, Web Interface, and via the Linksys app.

Generally, the Linksys Velop mesh system is a primary networking device with advanced features and the latest 6 technology. Additionally, sometimes users face issues with their Velop mesh that they can’t resolve with other methods. So, it is necessary for them to factory reset Linksys Velop device and reconfigure it from scratch.

In addition, there are three methods that you can use to hard reset your networking device. Initially, the most common method is using the Reset button, secondly through the Web GUI, and, thirdly using the Linksys app. The steps are very simple for each method but you have to be aware of them. If don’t know how to reset Linksys Velop, then stay tuned to this post. We explain the complete hard reset procedures but also throw light on the reasons why we need to reset the device, let’s have a look!

Why Factory Reset Linksys Velop is Needed?

Additionally, reset Linksys Velop is the last option when the issues with the Velo mesh itself can’t be resolved through other methods. A few of those root causes are listed below:

Quick Steps to Factory Reset Linksys Velop

In this section, we explore the steps for hard reset methods that will help you to get rid of the common issues. Keep in mind that follow the instructions carefully for Linksys Velop Reset and reconfigure it after reset. Moving back to the point, let’s have a look at the steps below:

Factory Reset Linksys Velop Using the Button

Initially, ensure your router is powered on before resetting.
Now, locate the reset button on the back of the Velop.
Press and hold the reset button for 10-15 seconds by using a pinpoint or paperclip.
When the power light turns blinking to solid, then the reset is complete.
Wait patiently till the networking device reboots itself.
Finally, you are done with the reset Linksys Velop to default settings you have to reconfigure it.

Linksys Velop Factory Reset Via Web Interface

To begin with, turn on your Velop router.
Connect the router network to the computer/laptop.
Open the web browser and type linksyssmartwifi.com on the browser bar.
Further, mention the admin username and password on the login window.
Here, you reach the smart setup wizard of the router.

Visit Administration>Factory Defaults>Restore Factory Defaults>Confirm.
Wait till the router reset is complete and the power light turns flashing to solid.
Lastly, your factory reset Linksys Velop node procedure is successfully completed.

Factory Reset Linksys Velop Using the App

First and foremost, confirm that the router is powered on.
Next, check that you have an updated version of the app.
Now, open the app and enter the admin details on the login window.
Here, you reach the smart dashboard of the Velop mesh.

Go to Settings>Administration/Advanced>Factory reset>Confirm.
Wait patiently until the router completes the reset process and restarts again.
At last, you are done with the reset Linksys Velop to factory settings process.

Can't Factory Reset Linksys Velop? Here's the Solution

Generally, different reasons are responsible for incomplete factory reset or failure of reset procedures. This can be due to different reasons, such as power outage, loose network cables, signal interferences, Firmware issues, etc. So, it is necessary to resolve these issues, so we share some effective troubleshooting methods below:

Check that the power cable is connected properly and is not damaged.
Next, ensure the power outlet provides adequate power supply or can change the power source.
Remove the network interferences like mirrors, furniture, cordless phones, etc.
Confirm that the network cables are connected properly.
Next, delete the corrupted or incompatible firmware file by visiting advanced settings.
If the WiFi signals are weak or there is no internet connection, then contact your ISP.

If want to know more about the Linksys Velop, then stay in touch with us!

FAQs

Where is the Reset Button on Linksys Velop System?

It is at the back of the Velop mesh commonly.

Do I Need to Reconfigure My Linksys Velop After Reset?

Yes, you have to reconfigure the settings of your Velop after resetting.

Can I Restore the Settings After Factory Reset Linksys Velop?

If you have the backup restored before the hard reset, then you can retrieve the prior settings easily. But not having a backup, then you have to reconfigure the settings from scratch after a factory reset.

Why is Username and Password Not Working After Linksys Velop Factory Reset?

Generally, after factory reset the device will revert to its default settings and your previous settings can’t work without a back restore. Also, if you have entered the incorrect default admin details, then it also refuses access to the login page.

Can I Factory Reset Linksys Velop Single Node?

Yes, you can hard reset a single node by disconnecting the other nodes. But it is recommended that if you factory reset the parent node, then it is necessary to reset the child nodes as well.