A Detailed View on How to Fix Linksys Velop Purple Light.
Linksys Velop purple light generally appears when Linksys velop is ready to set up. But if it stays for longer than usual, then it may be an issue due to the network disconnectivity. For detailed info regarding this error, read this guide.
In this fast-paced world, Linksys routers have their own space. Likewise, these networking devices are easy to install and configure due to their simple and user-friendly web interface. Additionally, users sometimes complain about the Linksys Velop purple light which is the part of router setup and nothing to worry about.
Moreover, the purple light on the Linksys router generally indicates that it is ready to configure. So, to resolve this light, access the admin panel of the Linksys Velop and then proceed with the setup. Besides this, if this light stays continuous for a longer time, then it should be an issue. Therefore, it is necessary to understand and resolve the Linksys Velop router purple light. In this blog post, we share the essential information that will help you to understand this light behavior and its fixouts.
What Does Purple Light Mean on Linksys Velop?
As discussed above, the purple light on the Linksys Velop points out different indications in various scenarios, let’s discuss it in brief here.
| Solid Purple Light | Blinking Purple Light | Continue Solid Purple Light |
|---|---|---|
|
Commonly, a solid purple light on Linksys Velop shows that it is ready for the setup. |
Blinking purple indicates that the Bluetooth setup is in progress via the Linksys app. |
If the purple light stays longer than usual on the Velop, then it points out that the Velop router is unable to connect to the internet. |
Why Does Linksys Velop Purple Light Continue on my Router?
Commonly, the purple light for a long time on the Velop router is a problematic thing. It may happen due to the various reasons, such as:
- Unstable internet connection
- Poor or no internet
- Insufficient power supply
- Loose or damaged cable connections
- Internet obstructions
- ISP issues
- Outdated Firmware
- Nodes are far away from each other
Linksys Velop Purple Light Troubleshooting
Moreover, the Linksys Velop Node Purple describes its setup mode as discussed above but if it stays continuously solid for a long time, then you have to fix it immediately. In addition, this can happen if the router is incapable of connecting with the local network. Similarly, we share some effective troubleshooting methods in this section to resolve it. Let’s have a look beneath:
Check the Network Cable Connections
Power Cycle the Linksys Velop Router
If you use a wired network connection, then check that the cables are connected appropriately. Additionally, if any of the linked network cables or power cord is damaged, then replace it immediately.
To resolve the technical glitches and internet connectivity issues, power cycle your networking gadget. For this, unplug the router and modem for 30 seconds minimum. After that, plug back the devices and see if the issue gets fixed.
Ensure Sufficient Power Supply
Stabilize the Internet Connection
Look around the power source and adaptor as they provide adequate power supply to the router and modem. Do not plug the networking devices into burnt or cracked electrical outlets.
If you use a wireless internet connection but it is unstable, opt for an ethernet cable connection. It will help to stabilize the network and avoid connection drop-off.
Eliminate Network Obstructions
Contact Your Internet Service Provider (ISP)
If network interferences are present here like mirrors, furniture, baby monitors, etc., then remove them as they disconnect the network. Also, relocate the Velop router to a central location.
Sometimes, the internet connection is poor or there is no internet on your router. It may happen due to the local area network management from the ISP side. So, contact your network authority and follow the guidelines.
Place Parent and Child Nodes Closer
Update the Velop Router Firmware
While configuring the Velop router, then place the primary router and child nodes closer to each other. If they are far away from each other, then the Linksys Velop purple light issue may occur.
Occasionally, the purple light issue on the Velop router may arise due to outdated firmware. So, visit the settings of your device and check for a firmware upgrade. If it is present, then follow the guidelines to update the router firmware.
Factory Reset the Linksys Velop
If nothing else works to resolve the Linksys Velop node purple issue, then factory reset the device. Remember, it reverts your networking gadget to the default settings and you have to reconfigure it. If you want to know the complete reset process, then visit us on our website.
Bottom Line
All in all, the information we share with you will surely assist you in fixing the Linksys Velop purple light issue on your router. Additionally, you understand the causes first and then choose the relevant solutions. If still seeking more help with the purple light issue, then stay in touch with us here!
FAQs
What Should the Light on Linksys Velop When it is Configured Properly?
When the Velop router and nodes are configured appropriately, the purple light should turn into solid blue.
Why My Linksys Velop Stuck on Purple Light?
While the Velop router is unable to connect with the local area network due to various reasons, the Velop is stuck on the purple light.
Why is Linksys Node Not Turning Purple?
It may happen due to network interferences, power supply issues, and outdated firmware mainly.