Looking for the steps to access the Linksys Velop extender setup page? You’re in the right place! Setting up a Linksys Velop Range extender does not have to be a hassle. That’s why we assist you with the complete setup process along with the tp link wireless extender login as well, to equip you with complete knowledge of the device functionality. This will also help you tackle Linksys Velop setup issues effectively.
But First, How Does A Range Extender Work?
Range extenders like the Linksys Velop here, work by receiving the wireless signal from the router and retransmitting the same to the areas considered as dead zones.
An advantage of using a Linksys Velop extender is the ease of setup. However, you do have to keep in mind that the extender position matters a lot.
Now, selecting the right location for your Linksys Velop extender is crucial. It is wise to keep the Linksys Velop device at a central location that’s closer to your existing router. Always install the range extender at a place where it stays away from electronic devices such as a cordless phone, microwave, etc. After you have placed the Linksys Velop extender, you have to set it up by visiting the web setup wizard.
Setting Up Linksys Velop Range Extender
To start with, you need to ensure you have access to the internet. Range extenders like Linksys Velop work by connecting to the router through a LAN Ethernet connection. Therefore, also make sure that you have those LAN cables with you.
Once you have these equipment and network credentials, you can begin with the setup process. Here are some steps you can follow:
- Take an Ethernet cable to set up a wired connection between your Linksys Velop device and a computer. Connect its one end to the computer and another end to the LAN port of the Linksys Velop extender device.
- Go to the “Network” under the control panel and assign your computer a static IP address.
- Now, launch an Internet browser such as Mozilla Firefox or Microsoft Internet Explorer on your computer that is connected to the network. In the URL field of the browser, type the Linksys Velop default IP address. You can use 192.168.1.1
Note: If you can’t access the login window using the IP address, try using the default web address https://www.extender.linksys.com. For more help on such Linksys Velop setup issues, you can always reach out to our team.
- Now press Enter key and it will redirect you to the Linksys Velop extender login page.
- When a login window appears, enter the default username and password in the respective fields.
- Once done, click the login button to access the web-based management page of the Linksys Velop Wi-Fi extender device.
Configuring The Internet Settings
- On the Linksys Velop web-based management page, click on the Quick setup tab. Click on the wireless tab from the menu.
- Now, select the Linksys Velop Wireless Range Extender from the drop down list in the Operation mode field. Click on the search button to search for your extender’s network.
- Find and select the network name (SSID) of your Linksys Velop device from the list of available networks. Click connect and then click on the save button.
- Next, select the ‘wireless security’ under the ‘Wireless’ section. Select an advanced security standard. The latest security encryption standard is WPA2-PSK/WPA-PSK and encryption AES.
- Now, type in the network password that you would like to keep in the password field and click on the ‘save’ button. Allow some time for the changes to take effect. It is necessary for both router and extender to have the same security settings. Your network is now ready to use.
Basic Linksys Velop Troubleshooting Tips
If you are facing Linksys Velop setup issues and are wondering how to tackle them, here are some basic Linksys velop troubleshooting tips you can follow:
Restart Your Velop Extender
Whenever you are working with your extender, chances are the hardware is overworked. Under such circumstances, the temporary or residual software files may build up to hinder the device performance. When you restart your device, it clears the files and any bugs that are the reason behind most Linksys velop issues.
Check For Basic Hardware Connections
If you find that your device is unable to detect the signals, chances are the ethernet cables that you are using are faulty and need replacement. Also, check if the connection at the ports is secure and the cables are in the best form. Once you have done that, you can restart your device once and begin accessing the internet again.