Linksys Velop Keeps Disconnecting? Explore the quick fixes here!

Nowadays, networking devices have become an incredible part of modern life. Similarly, the Linksys Velop mesh systems are one such gadget. However, these support modern wireless networking technology but users sometimes experience issues with their gateways, such as Linksys Velop keeps disconnecting. However, this is a very common problem among the users but can easily be resolved.

Moreover, this issue can arise due to the weak internet connection and the signal barriers. So, it is necessary to resolve the Linksys Velop node keeps going offline for the optimum router process. Therefore, to assist users like you, we share this brief guide. Here, you find detailed information regarding the same, so stay tuned here!

Why Do My Linksys Nodes Keep Disconnecting?

Generally, several other reasons are also responsible for Velop getting disconnected from the network except for poor internet connection and signal interferences, so take a look beneath: 

  • Parent and child nodes are placed farther
  • Outdated firmware/corrupted file
  • Technical glitches and bugs
  • The master router and modem are not connected properly
  • Loose cable connection/faulty cables
  • ISP issues
  • Power loss
  • Congested network channels
  • Router overheated

Quick Fixes for the Linksys Velop Keeps Disconnecting

Additionally, the Velop mesh system is renowned for its outstanding performance. However, the glitches with the router frustrated the users and hindered their surfing and gaming experiences. 

Therefore, it is necessary to resolve the Linksys Mesh WiFi keeps disconnecting issue to resume its normal functioning. So, in this section, we share the effective methods to fix the above-mentioned issues, take a walk here!

Stabilize the Internet

Commonly users join the direct wireless connection and experience issues sometimes. Therefore, to stabilize the internet connection, use the ethernet cable and connect it properly to the accurate ports.

Place Parent and Child Nodes Closer

If the master router and secondary nodes are placed far away, then Linksys node keeps disconnecting issues are very common at that time. Hence, place the parent and child nodes closer and at an appropriate distance from each other.

Eliminate the Signal Obstructions

Consequently, the signal interferences like furniture, microwaves, baby monitors, cordless phones, mirrors, and more. Remove them away from the Velop router and nodes otherwise relocate the networking devices.

Connect the Primary Router to the Modem Appropriately

If the cable connections are loose or the ethernet cables are damaged/tangled, then Linksys Velop dropping connection errors may appear. So, to fix this, check the router and modem connections and tighten them if needed. Also, replace the damaged or frayed cables.

Power Cycle the Velop

To fix the technical issues and the bugs on your router and the nodes, reboot the networking device. For this, power off the networking gadgets and plug them out for 30 seconds. Now, plug back them and check if the Linksys Velop dropping connection issue gets fixed.

Contact the ISP Authority

Sometimes network issues arise from your network provider’s side or they restrict the access to their network for your networking device. Hence, it is necessary to contact the ISP authority and follow the guidelines they explain to you.

Change the Network Channel

If the master router and the Linksys Velop child node keeps disconnecting frequently, then this may happen because of channel congestion. For this, you need to access the admin panel of the router, then visit the wireless settings, and then the channel. Here, look for the less overloaded channel and shift to it by following instructions.

Ensure Sufficient Power Supply

Check that the router and the connected gadgets like the modem and computer have sufficient power supply. Also, use the original adaptor and power cables and ensure these are not damaged or burnt.

Place Router & Nodes in a Ventilated Area

Make sure the parent gateway and child nodes are placed in a ventilated and shady area. If the router gets overheated, then Linksys Velop keeps disconnecting issues can occur. Hence, power off the router for some time till it cools down. Hence, it should be necessary to place the networking device in a cool place and away from direct sunlight.

Upgrade the Firmware

Sometimes the router keeps disconnected from the internet if the router has outdated firmware or a corrupted file version. Therefore, go to the advanced settings of the router and check the window for the firmware upgrade. If it prompts, then follow the guidelines to complete the firmware update procedure. Also, delete the corrupted firmware file version and download a compatible and recent file again.

Factory Reset the Velop Router

If nothing else works to resolve the router or Linksys Velop node keeps going offline issue, then factory reset the networking device. This will revert your router and child nodes to their default settings and you have to reconfigure them.

Bottom Line

In a nutshell, you find detailed information regarding the Linksys Velop keeps disconnecting issue. Additionally, from reasons to easy and effective troubleshooting methods you find here. If still seeking more assistance with the Velop networking devices, then stay in touch with us!